Revision notesIntermediate · Section 2: Technical aspects

Transformers and tuned circuits: resonance, impedance and Q

How a transformer steps voltage up or down, what happens when a capacitor and inductor resonate, how series and parallel tuned circuits behave, and what Q tells you about selectivity.

Key points

TransformerTwo coils sharing a magnetic field. Works only with AC; the output is always AC.
TurnsFewer secondary turns step the voltage down; more step it up. Voltage ratio = turns ratio.
CoresIron at mains frequencies; ferrite at RF and IF.
ResonanceXL = XC. Energy swaps between the capacitor's electric field and the inductor's magnetic field.
Series and parallelSeries tuned: low impedance at resonance. Parallel tuned: high impedance at resonance.
Tuning directionMore L or more C lowers the resonant frequency; less raises it.
Q and selectivityHigh Q: narrow bandwidth, sharp peak, more selective.

Covered in the full lesson

  • At resonance
  • Impedance curve
  • More L or C
  • High Q

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

A transformer has fewer turns on its secondary than its primary. What does it do?
  1. Steps the voltage down
  2. Steps the voltage up
  3. Converts AC to DC
  4. Blocks AC
Answer: A. Fewer secondary turns give a lower output voltage.

Can you work it out?

A transformer has 1200 turns on the primary and 60 on the secondary, fed with 230 V AC. Find the output voltage.

The full lesson walks through the working step by step, with 1 worked example in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Frequency and wavelength, RF on conductors and digital signals · Next: Filters: low pass, high pass, band pass and notch

All revision notes · Free video lessons · The three exams