Revision notesIntermediate · Section 2: Technical aspects

Filters: low pass, high pass, band pass and notch

The four filter types, their circuits and response curves, the cut-off frequency, and how filters stop a transmitter radiating harmonics.

Key points

Low passPasses below the cut-off. Series L, shunt C.
High passPasses above the cut-off. Series C, shunt L.
Band pass and notchBand pass passes one band; notch (band stop) blocks one band. Built from tuned circuits.
Cut-off frequencyWhere the response starts to fall away between passband and stopband.
HarmonicsMultiples of the wanted frequency, produced by RF power amplifiers.
Harmonic filteringA low pass (or band pass) filter after the transmitter; a notch for one specific harmonic.

Covered in the full lesson

  • Low pass
  • High pass
  • Band pass
  • Notch

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

Which filter should be fitted after an HF transmitter to reduce harmonic radiation?
  1. Low pass
  2. High pass
  3. Notch at the wanted frequency
  4. None; harmonics can't be filtered
Answer: A. Harmonics are above the wanted frequency, so a low pass filter blocks them.

Can you work it out?

Find the second and third harmonics of 145 MHz.

The full lesson walks through the working step by step, with 2 worked examples in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Transformers and tuned circuits: resonance, impedance and Q · Next: Semiconductors: diodes, transistors, amplifiers, oscillators and ICs

All revision notes · Free video lessons · The three exams