Revision notesIntermediate · Section 2: Technical aspects
Frequency and wavelength, RF on conductors and digital signals
Converting between frequency and wavelength, why current and voltage vary along an antenna wire, and how sampling turns an analogue signal into a digital one.
Key points
Wave equationv = f × λ, with v = 3 × 10⁸ m/s (given in the reference booklet).
Shortcutλ (m) = 300 ÷ f (MHz); f (MHz) = 300 ÷ λ (m).
Sense checkHigher frequency means shorter wavelength; the answer should match the band name.
RF on a conductorWhen the wire is comparable to a wavelength, current and voltage vary sinusoidally along it.
SamplingMore bits and a higher sample rate give a more accurate digital copy; quantisation error is distortion.
Nyquist rateSample at more than twice the highest frequency in the signal.
Covered in the full lesson
- Wavelength
- Frequency
- Sampling rate
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
What is the wavelength of a 145 MHz signal?
- About 2 m
- About 20 m
- About 0.2 m
- About 145 m
Answer: A. λ = 300 ÷ 145 ≈ 2.07 m.
Can you work it out?
Find the wavelength of 7.1 MHz.
The full lesson walks through the working step by step, with 3 worked examples in all.
The full lesson adds more
In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: Alternating current: sine waves, RMS, phase and reactance · Next: Transformers and tuned circuits: resonance, impedance and Q