Revision notesIntermediate · Section 2: Technical aspects

Alternating current: sine waves, RMS, phase and reactance

The sine wave, period and frequency, phase, RMS and peak values, and how capacitors and inductors oppose alternating current in opposite ways as frequency changes.

Key points

Sine waveDescribed by amplitude and frequency. A square wave switches between two levels.
Period and frequencyT = 1/f and f = 1/T. 50 Hz → 20 ms.
PhaseOffset between two waves of the same frequency, in degrees.
RMSThe DC value with the same heating effect. Vrms = 0.707 × Vpk; Vpk = Vrms ÷ 0.707.
ReactanceOpposition of C or L to AC, in ohms; V and I 90° apart. Xc falls with frequency; XL rises.
ImpedanceOverall V ÷ I in a circuit with R and L or C, in ohms.

Covered in the full lesson

  • Period
  • RMS
  • Peak
  • Capacitive reactance
  • Inductive reactance

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What is the period of a 50 Hz waveform?
  1. 20 ms
  2. 50 ms
  3. 2 ms
  4. 0.5 s
Answer: A. T = 1/f = 1/50 = 0.02 s = 20 ms.

Can you work it out?

A sine wave has an RMS value of 230 V. Find its peak.

The full lesson walks through the working step by step, with 3 worked examples in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Capacitors and inductors: how they work and how they combine · Next: Frequency and wavelength, RF on conductors and digital signals

All revision notes · Free video lessons · The three exams