Revision notesIntermediate · Section 2: Technical aspects

Capacitors and inductors: how they work and how they combine

What capacitance and inductance are, what increases them, the series and parallel formulas for each, polarised capacitors and tuning slugs.

Key points

CapacitanceTwo plates and a dielectric; measured in farads. Increases with larger plate area, smaller separation and a better dielectric.
InductanceA coil stores energy in its magnetic field; measured in henries. Increases with more turns, larger diameter and closer spacing.
Cores and slugsHigh-permeability cores raise inductance; a movable ferrite slug adjusts it.
Capacitors combinedParallel: C = C1 + C2 + C3. Series: 1/C = 1/C1 + 1/C2 + 1/C3.
Inductors combinedSeries: L = L1 + L2 + L3. Parallel: 1/L = 1/L1 + 1/L2 + 1/L3.
Polarised capacitorsElectrolytics must be connected the right way round; reversed they can be destroyed or burst.

Covered in the full lesson

  • Stores energy in
  • Unit
  • Increase it with
  • Series
  • Parallel

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What is the total capacitance of 100 pF and 220 pF in parallel?
  1. 320 pF
  2. 69 pF
  3. 120 pF
  4. 22 000 pF
Answer: A. Capacitors in parallel add.

Can you work it out?

Find the total of 10 µF and 40 µF in series.

The full lesson walks through the working step by step, with 3 worked examples in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Resistors: series, parallel, potential dividers and source resistance · Next: Alternating current: sine waves, RMS, phase and reactance

All revision notes · Free video lessons · The three exams