Revision notesFull · Section 2: Technical aspects
Semiconductors: Zener diodes, biasing, amplifier types and oscillators
Zener diodes, biasing bipolar and field effect transistors, the three amplifier configurations, amplifier classes, and what keeps an oscillator going.
Key points
Zener diodeConducts in reverse above its Zener voltage, holding the voltage nearly constant: a reference.
BiasingSets the resting current so the device works linearly. NPN and PNP have opposite polarities. FETs are voltage controlled; dual-gate FETs allow gain control.
Common emitter / sourceVoltage and current gain; 180° phase inversion; medium input impedance.
Emitter / source followerVoltage gain ≈ 1; high input, low output impedance; in phase. A buffer.
Common baseLow input, high output impedance; voltage gain; current gain ≈ 1; in phase. For high frequencies.
Classes and oscillatorsA (360°, linear), B (180°, push-pull), AB (a little more, linear PAs), C (< 180°, efficient, FM/CW). Oscillation: loop gain ≥ 1 and 360° phase shift.
Covered in the full lesson
- Common emitter
- Emitter follower
- Common base
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
What happens when a Zener diode's reverse voltage reaches its rated value?
- It conducts and holds the voltage steady
- It stops conducting completely
- It conducts only in the forward direction
- It is destroyed
Answer: A. The sharp knee in the reverse characteristic.
The full lesson adds more
In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: Transformers, sampling and aliasing · Next: Power supplies: stabilisers, PIV and switch mode