Revision notesFull · Section 3: Transmitters and receivers
Oscillators and synthesisers: drift, PLL and DDS
Why drift matters, how a phase locked loop synthesiser works and sets its step size, direct digital synthesis, and how synthesisers can go off frequency.
Key points
DriftSlow frequency change from temperature, supply or ageing. Minimise with stable parts, regulation, compensation or synthesis.
PLLCrystal ÷ fixed divider (A) → phase comparator ← VCO ÷ programmable divider (N); error → low pass filter → VCO.
PLL formulasfstep = fcrystal ÷ A; fout = fcrystal × N ÷ A.
DDSClock → look-up table of sine values → DAC → low pass filter. More bits: purer signal.
Off frequencyLoss of lock, wrong divider, spurious outputs.
PreventionLock detector that inhibits transmit; check with a counter; keep inside band edges.
Covered in the full lesson
- PLL
- DDS
- Faults
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
In a PLL, what does the phase comparator control?
- The VCO, through the loop filter
- The frequency of the crystal reference oscillator
- The fixed divider
- The audio amplifier
Answer: A. Its error voltage is filtered and steers the VCO.
Can you work it out?
A 10 MHz crystal is divided by 1000. Find the step size.
The full lesson walks through the working step by step, with 3 worked examples in all.
The full lesson adds more
In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: SSB and FM transmitters: modulation index, bandwidth and multipliers · Next: RF power amplifiers: linearity, classes, peak power and ALC