Revision notesFull · Section 3: Transmitters and receivers

SSB and FM transmitters: modulation index, bandwidth and multipliers

FM modulation index and sidebands, SSB and FM transmitter block diagrams, frequency multipliers, and calculating the bandwidth of AM, SSB and FM signals.

Key points

Modulation indexm = deviation ÷ modulating frequency. Higher m: more significant sidebands, wider signal.
SSB transmitterBalanced modulator (carrier suppressed) → sideband filter at a fixed frequency → mixer with VFO → linear amplifier.
FM transmitterLow-frequency modulated oscillator and multipliers (deviation multiplied), or mixing to the final frequency.
MultipliersA non-linear stage makes harmonics; the output is tuned to the wanted one. Used in many microwave transmitters.
BandwidthAM: 2 × fmax. SSB: ≈ audio bandwidth. FM (Carson): 2(Δf + fmax).
Filter frequenciesUSB: carrier + 300 Hz to carrier + 3 kHz; LSB below the carrier.

Covered in the full lesson

  • AM
  • SSB
  • FM

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

An FM signal has 5 kHz deviation with a 2.5 kHz tone. What is the modulation index?
  1. 2
  2. 12.5
  3. 0.5
  4. 7.5
Answer: A. m = deviation ÷ audio frequency = 5 ÷ 2.5.

Can you work it out?

Find the modulation index for 3 kHz deviation with a 1 kHz tone.

The full lesson walks through the working step by step, with 4 worked examples in all.

The full lesson adds more

In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Next: Oscillators and synthesisers: drift, PLL and DDS

All revision notes · Free video lessons · The three exams