Revision notesIntermediate · Section 3: Transmitters and receivers

Inside a transmitter: oscillators, stability, DDS and amplifier efficiency

The block diagrams of CW, AM, SSB and FM transmitters, crystal versus variable oscillators, how to keep an oscillator stable, digital synthesis, and how to work out amplifier efficiency.

Key points

CW transmitterOscillator → buffer → power amplifier, keyed on and off.
SSB transmitterBalanced modulator → SSB filter → mixer → linear PA.
FM transmitterAudio varies the oscillator frequency (often with a varicap) → PA.
Crystal vs VFOCrystal: stable, fixed. VFO: tunable, set by its tuned circuit, prone to drift. Modern rigs: crystal-referenced synthesisers.
StabilityRigid construction, screening, regulated supply, buffer amplifier. Drift can take you out of band.
DDSWaveform values from a lookup table, through a DAC, generate audio or RF.
EfficiencyRF output ÷ DC input × 100%. DC input = V × I. The rest is heat.

Covered in the full lesson

  • CW
  • AM
  • SSB
  • FM

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

A PA stage draws 200 W from its supply and is 60% efficient. What is its RF output?
  1. 120 W
  2. 60 W
  3. 80 W
  4. 333 W
Answer: A. Output = 200 × 0.6 = 120 W; the other 80 W is heat.

Can you work it out?

A transceiver draws 20 A from a 13.8 V supply and delivers 100 W RF. Find its efficiency.

The full lesson walks through the working step by step, with 2 worked examples in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Modulation: AM depth, FM deviation and single sideband · Next: Clean transmissions: harmonics, key clicks and chirp

All revision notes · Free video lessons · The three exams