Revision notesIntermediate · Section 3: Transmitters and receivers

Clean transmissions: harmonics, key clicks and chirp

Where harmonics come from and who they bother, why fast keying causes key clicks and how to shape it, and what causes chirp and how to cure it.

Key points

HarmonicsWhole-number multiples of the fundamental, produced by oscillators, mixers and amplifiers. They can interfere with other bands and other services.
Key clicksToo-fast rise and fall of the CW envelope widens the signal. Cure: a filter in the keying stage to shape the envelope.
ChirpFrequency shift on keying, caused by load or supply changes affecting the oscillator.
Chirp curesBuffer amplifier, regulated oscillator supply, key a later stage.

Covered in the full lesson

  • Harmonics
  • Key clicks
  • Chirp

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What causes key clicks on a CW signal?
  1. Too fast a rise and fall of the RF envelope
  2. Too slow a keying speed on the Morse key
  3. Using a crystal oscillator in the transmitter
  4. Running the transmitter from a low supply voltage
Answer: A. Sharp keying edges spread the signal's bandwidth.

Can you work it out?

A transmitter on 3.6 MHz has a strong 3rd harmonic. Where does it fall?

The full lesson walks through the working step by step, with 1 worked example in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Inside a transmitter: oscillators, stability, DDS and amplifier efficiency · Next: Receivers: sensitivity, selectivity and the superhet

All revision notes · Free video lessons · The three exams