Revision notesIntermediate · Section 4: Feeders and antennas

Antennas: patterns, gain, EIRP, Yagis and traps

Radiation patterns in three dimensions, front-to-back ratio and beamwidth, isotropic gain and EIRP, the angle of radiation, feed point impedance, the Yagi and the trap.

Key points

Pattern termsFront-to-back ratio: forward vs rearward, in dB. Beamwidth: main lobe between half-power points. Patterns are 3D.
Isotropic and dBiIsotropic radiator: theoretical, equal in all directions. A half-wave dipole has 2.15 dBi.
EIRPPower into the antenna × gain relative to isotropic. 10 W + 10 dBi = 100 W EIRP.
Angle of radiationLong distance needs a low angle; ground and height affect it.
Feed point impedanceCorrect only at the design frequency. Dipole: 73 Ω free space, ≈ 50 Ω in practice.
YagiDriven element (λ/2), longer reflector, shorter director(s).
TrapParallel tuned circuit: high impedance at resonance isolates the outer section, giving multi-band operation.

Covered in the full lesson

  • Front-to-back ratio
  • Beamwidth
  • dBi
  • EIRP
  • Angle of radiation
  • Trap

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What is the gain of a half-wave dipole relative to an isotropic radiator?
  1. 2.15 dBi
  2. 1.64 dBi
  3. 0 dBi
  4. 3.15 dBi
Answer: A. A dipole has 2.15 dBi in its best direction.

Can you work it out?

25 W is fed to a Yagi with 13 dBi gain. Find the EIRP.

The full lesson walks through the working step by step, with 2 worked examples in all.

The full lesson adds more

In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Feeders, baluns, SWR and matching

All revision notes · Free video lessons · The three exams