Revision notesFull · Section 2: Technical aspects
Resonance, Q, dynamic resistance and crystals
Finding resonant frequency, Q and the voltages it produces, half-power points and bandwidth, dynamic resistance, and how quartz crystals resonate.
Key points
Resonancef = 1 ÷ 2π√LC, where XL = XC. Use henries and farads.
QSeries: Q = 2πfL ÷ R = 1 ÷ 2πfCR. Voltage across L or C = Q × supply. Parallel: circulating current = Q × supply current.
Component ratingHigh Q means high voltages and currents: rate capacitors and coils accordingly.
BandwidthBetween the half-power (−3 dB, 0.707) points. Q = fc ÷ (fU − fL).
Dynamic resistanceRD = L ÷ CR for a parallel circuit at resonance; Q = 2πfC × RD.
CrystalsSeries LCR with parallel holder capacitance; series and parallel resonance. Use in the mode it was made for.
Covered in the full lesson
- Resonant frequency
- Q
- Dynamic resistance
- Half-power points
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
What is the resonant frequency of 10 µH and 100 pF, approximately?
- 5.0 MHz
- 50 MHz
- 0.5 MHz
- 15.9 MHz
Answer: A. f = 1 ÷ (2π√(10×10⁻⁶ × 100×10⁻¹²)) ≈ 5.03 MHz.
Can you work it out?
Find the resonant frequency of 10 µH and 100 pF.
The full lesson walks through the working step by step, with 4 worked examples in all.
The full lesson adds more
In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: Reactance, phase, impedance and coupling · Next: Transformers, sampling and aliasing