Revision notesFull · Section 2: Technical aspects
Resistor networks, power and tolerance
Solving series and parallel resistor networks for current, voltage and power, the three power formulas, and how component tolerances affect a circuit.
Key points
MethodReduce parallel groups, add the series total, find the total current, then work back for each voltage and branch current.
PowerP = V × I = V² ÷ R = I² × R. Choose the form that uses what you know.
Resistor ratingPick a rating comfortably above the power it dissipates.
ParallelTwo equal resistors give half; any parallel total is below the smallest.
ToleranceMarked values are nominal. Errors shift voltages, currents and frequencies; use close-tolerance or adjustable parts where it matters.
Covered in the full lesson
- 1
- 2
- 3
- 4
- 5
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
What power is dissipated when 20 V is across 100 Ω?
- 4 W
- 2000 W
- 0.2 W
- 40 W
Answer: A. P = V² ÷ R = 400 ÷ 100 = 4 W.
Can you work it out?
100 Ω is in series with 200 Ω ∥ 200 Ω across 12 V. Find the current.
The full lesson walks through the working step by step, with 4 worked examples in all.
The full lesson adds more
In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.