Revision notesFull · Section 2: Technical aspects

Capacitance, charge, inductance and time constants

What sets a capacitor's value, charge and the coulomb, dielectrics and breakdown voltage, self-inductance and back EMF, and time constants in CR and LR circuits.

Key points

CapacitanceC = kA ÷ d, with k = ε0 × εr. More plate area, less separation or higher permittivity: more capacitance.
ChargeThe coulomb: Q = I × t. On a capacitor, Q = V × C.
DielectricsAir (variables), ceramic and mica (RF), polyester (general). Some have losses that rise with frequency.
Breakdown voltageUse capacitors well within their voltage rating.
Self-inductanceA changing current induces a back EMF that opposes the change; switching off can cause a spike.
Time constantsτ = CR or τ = L ÷ R. One τ: 63% of the change (or down to 37%). Five τ: complete.

Covered in the full lesson

  • Capacitance
  • Charge
  • CR time constant
  • LR time constant
  • Breakdown

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What happens to capacitance if the plates are moved further apart?
  1. It decreases
  2. It increases
  3. It stays the same
  4. It doubles
Answer: A. C = kA ÷ d: more separation, less capacitance.

Can you work it out?

What charge is stored on 10 µF at 12 V?

The full lesson walks through the working step by step, with 4 worked examples in all.

The full lesson adds more

In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Resistor networks, power and tolerance · Next: Reactance, phase, impedance and coupling

All revision notes · Free video lessons · The three exams