Revision notesFull · Section 4: Feeders and antennas

Feeders and matching: velocity factor, return loss, AMUs and quarter-wave transformers

Velocity factor and electrical length, balun types, SWR and return loss, how feeder loss hides a mismatch, matching units, and the quarter-wave transformer.

Key points

Velocity factorSpeed in the feeder ÷ speed in free space; always < 1. Solid polythene coax ≈ 0.66. Physical length = electrical length × VF.
BalunsTransformer (1:1 or 4:1, on ferrite), sleeve (λ/4 sleeve over the coax), choke (coiled coax or ferrite beads).
SWRVmax ÷ Vmin = (Vf + Vr) ÷ (Vf − Vr).
Return loss10 log (incident ÷ reflected) dB. Low SWR = high return loss. RL at TX = RL at antenna + 2 × feeder loss.
AMUCancels reactance and transforms to a resistive 50 Ω. T, Pi and L networks; at either end of the feeder.
λ/4 transformerZ0² = Zin × Zout. 100 Ω to 50 Ω needs ≈ 71 Ω (use 75 Ω coax).

Covered in the full lesson

  • Physical length
  • SWR
  • Return loss
  • RL at TX
  • λ/4 transformer

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

Coax has a velocity factor of 0.66. How long is an electrical half wave at 10 MHz?
  1. 9.9 m
  2. 15 m
  3. 30 m
  4. 22.7 m
Answer: A. λ/2 = 15 m in free space × 0.66.

Can you work it out?

Find the physical length of a λ/4 section at 14.2 MHz in coax with VF 0.66.

The full lesson walks through the working step by step, with 4 worked examples in all.

The full lesson adds more

In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Next: Antenna lengths, current and voltage, and feed point impedance

All revision notes · Free video lessons · The three exams