Revision notesFull · Section 4: Feeders and antennas

Antenna lengths, current and voltage, and feed point impedance

Calculating practical dipole and vertical lengths with an end factor, current and voltage along an antenna, and the feed point impedances of common antennas.

Key points

Lengthλ = 300 ÷ f. Real antennas are shorter: end factor ≈ 0.95. Half-wave dipole ≈ 143 ÷ f (MHz) m.
Current and voltageDipole: current maximum at the centre, voltage maximum at the ends. λ/4 ground plane: current maximum at the base, voltage at the tip.
Feed impedancesDipole ≈ 73 Ω; λ/4 vertical ≈ 36 Ω; loaded 5/8 λ ≈ 50 Ω; folded dipole ≈ 300 Ω; full-wave loop ≈ 100–120 Ω; end-fed λ/2 very high.
End feedingEnd-fed λ/4 is low impedance; end-fed λ/2 is at a voltage maximum: very high.
Parasitic elementsLower the driven element's impedance; a folded dipole raises it about four times.

Covered in the full lesson

  • Half-wave dipole, centre fed
  • λ/4 vertical or end-fed λ/4
  • Loaded 5/8 λ vertical
  • Folded dipole
  • Full-wave loop
  • End-fed λ/2

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

About how long is a half-wave dipole for 14.2 MHz?
  1. 10 m
  2. 21 m
  3. 5 m
  4. 7 m
Answer: A. 143 ÷ 14.2 ≈ 10.1 m.

Can you work it out?

Find the length of a half-wave dipole for 7.1 MHz (end factor 0.95).

The full lesson walks through the working step by step, with 2 worked examples in all.

The full lesson adds more

In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Feeders and matching: velocity factor, return loss, AMUs and quarter-wave transformers

All revision notes · Free video lessons · The three exams