Revision notesFull · Section 6: Electromagnetic compatibility

Curing interference: filters, field strength, bonding, vehicles and complaints

Filters and stubs, mains and braid-breaking filters, why ferrite rings stop common-mode current, calculating field strength, RF bonding, balanced antennas, vehicle installations and handling complaints.

Key points

FiltersHigh, low, band pass and band stop in L, T and π configurations; coaxial stubs as notches or traps; ferrite beads and rings.
Mains filterSeries chokes in live and neutral; capacitors across the line and to earth.
Braid-breaking filterCapacitors in series with inner and braid block HF on the braid; often combined with a high pass filter.
Ferrite ringBlocks common-mode current; the wanted differential-mode signal's fields cancel, so it passes.
Field strengthE = 7√ERP ÷ d (V/m, d in metres); or 5.5√EIRP ÷ d. Use the minimum needed. Bond equipment with short wide straps; balanced antennas; feeders at right angles.
Vehicles and complaintsFCS UK code of practice. Check your own station, keep logs, test together, RSGB EMC advice; Ofcom can investigate.

Covered in the full lesson

  • Low pass filter
  • High pass / braid-breaking
  • Ferrite ring
  • Mains filter
  • Coaxial stub
  • Field strength

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What is the field strength 10 m from an antenna radiating 100 W ERP?
  1. 7 V/m
  2. 70 V/m
  3. 0.7 V/m
  4. 10 V/m
Answer: A. E = 7 × √100 ÷ 10.

Can you work it out?

Find the field strength 10 m from 100 W ERP.

The full lesson walks through the working step by step, with 3 worked examples in all.

The full lesson adds more

In the Full course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: How interference happens: blocking, cross-modulation, rectification and images

All revision notes · Free video lessons · The three exams