Revision notesIntermediate · Section 3: Transmitters and receivers
Software defined radio: time and frequency domains
How an SDR uses the Fourier transform, what the time and frequency domains show, simple spectra of harmonic waves, and the blocks inside a software defined radio.
Key points
Time domainAmplitude against time (oscilloscope view).
Frequency domainAmplitude against frequency (spectrum view).
Fourier transformSplits a composite signal into its component frequencies; drives spectrum and waterfall displays.
Simple spectraPure sine: one line. Sine + one harmonic: two lines.
Digital filtersCan be far more selective than analogue filters.
SDR blocksAntenna → band pass filter/amplifier → ADC → digital processing → DAC → audio.
Covered in the full lesson
- Antenna and band pass filter
- ADC
- Digital processing
- DAC and audio amplifier
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
What does a Fourier transform do in an SDR?
- Splits a signal into its component frequencies
- Amplifies the RF signal before the mixer stage
- Converts the AC mains into DC for the processor
- Generates harmonics to extend the tuning range
Answer: A. It moves the signal from the time domain to the frequency domain.
The full lesson adds more
In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: Receivers: sensitivity, selectivity and the superhet