Revision notesIntermediate · Section 2: Technical aspects
Power supplies: cells, batteries, rectifiers and regulators
Cell voltages and battery capacity, half-wave, full-wave and bridge rectifiers, smoothing with a reservoir capacitor, and linear versus switched-mode supplies.
Key points
CellsDifferent chemistries give different voltages: alkaline 1.5 V, NiMH 1.2 V, Li-ion ≈ 3.7 V, lead-acid ≈ 2 V per cell.
CapacityMeasured in ampere-hours (Ah). Hours ≈ capacity ÷ current (ideal).
RectifiersHalf wave: one diode. Full wave: two diodes and a centre tap, or four in a bridge. Full wave gives twice the pulses.
Reservoir capacitorCharges during conduction, discharges between pulses; leaves a small ripple.
RegulationDiscrete or IC regulator holds the output steady.
Linear vs switched modeLinear: heavy, hot, quiet. Switched mode: small, light, efficient, can radiate RFI.
Covered in the full lesson
- Transformer
- Rectifier
- Reservoir capacitor
- Regulator
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
How long could a 20 Ah battery ideally supply an average current of 4 A?
- 5 hours
- 80 hours
- 0.2 hours
- 16 hours
Answer: A. Hours ≈ 20 Ah ÷ 4 A = 5 h.
Can you work it out?
A 12 V, 17 Ah battery powers a rig drawing 1.5 A on receive. Estimate the running time.
The full lesson walks through the working step by step, with 1 worked example in all.
The full lesson adds more
In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: Semiconductors: diodes, transistors, amplifiers, oscillators and ICs