Revision notesIntermediate · Section 9: Measurements and construction
Measurements and construction: meters, decibels, colour code and soldering
Using a multimeter correctly, voltmeters and ammeters, measuring power, decibel arithmetic with 3 and 10 dB, dBW, dBi and dBd, the resistor colour code and markings, screening and soldering.
Key points
MultimeterSet function, range and polarity before connecting.
Voltmeter and ammeterVoltmeter: high resistance, in parallel. Ammeter: low resistance, in series. Power = V × I.
Analogue vs digitalAnalogue: trends and peaks. Digital: precise readings, poor for changing values.
Decibels3 dB = × 2, 10 dB = × 10; gains and losses add. 14 dBW = 25 W.
dBW, dBi, dBdRelative to 1 W; to an isotropic radiator; to a half-wave dipole.
Colour code0 black … 9 white. Gold multiplier ÷ 10. Tolerance: gold 5%, silver 10%.
Markings4R7 = 4.7 Ω; 3k3 = 3.3 kΩ; capacitor 103 = 10 nF.
SolderingLow-melting alloy with flux. Clean and tin the tip; tin wires first.
Covered in the full lesson
- +3
- +6
- +10
- +13
- −3
- −10
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
How is a voltmeter connected to measure the voltage across a component?
- In parallel with it
- In series with it
- Across the fuse only
- Through a capacitor
Answer: A. Voltmeters go in parallel; ammeters in series.
Can you work it out?
Express 25 W in dBW.
The full lesson walks through the working step by step, with 3 worked examples in all.
The full lesson adds more
In the Intermediate course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.