Revision notesFoundation · Section 6: Electromagnetic compatibility
EMC: how interference happens and how to cure it
What EMC and immunity mean, which modes cause most trouble, how RF gets into other equipment, and the cures, including the dummy load test.
Key points
EMCElectromagnetic compatibility: avoiding interference between pieces of electronic equipment.
ImmunityThe ability to work properly in the presence of strong RF.
What causes most troubleMore power, and AM and SSB. FM and some HF data modes are least likely to cause problems.
How RF gets inHouse wiring, TV down-leads, telephone wiring; at VHF/UHF, direct pick-up in internal circuits.
CuresChokes and filters on mains or antenna leads, fitted as close to the affected device as possible.
Dummy loadA screened resistor of the right value and power rating. Interference that continues into it means RF is escaping along leads into the mains.
Covered in the full lesson
- EMC
- Immunity
- Most troublesome modes
- Paths in
- Cures
- Dummy load
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
What is meant by immunity?
- Working properly in strong radio signals
- Being unable to transmit
- Having a very sensitive receiver
- Blocking all signals from reaching an antenna
Answer: A. Immunity is resistance to interference from strong RF.
The full lesson adds more
In the Foundation course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Next: A good neighbour: antenna siting, RF earths, vehicles and complaints