Revision notesFoundation · Section 7: Operating practices
Band plans, repeaters, digital modes, satellites and going abroad
Reading a band plan, sharing the spectrum, using repeaters, digital voice, connecting other equipment, satellites, and operating abroad.
Key points
Band plansSections for each mode, calling frequencies and recommended modes. Narrow modes (CW, data) at the lower end. LSB below 10 MHz, USB above. Avoid beacon frequencies.
SpectrumBands are allocated to broadcasting, aeronautical, maritime, amateur and others. Some amateur bands are shared or adjacent.
RepeatersExtend mobile range. Input and output differ (offset); CTCSS tone for access; time-out and reset tone. No simplex on repeater frequencies.
Digital modesDV and DD systems may not be compatible. Check the channel first. Update the embedded call sign on a borrowed radio.
InterfacesAnything other than the supplied mic: check PTT operation and audio levels.
Satellites and abroadNo terrestrial operation on satellite frequencies. Other countries don't routinely recognise the Foundation licence.
Covered in the full lesson
- Band plan
- Spectrum
- Repeater
- Simplex
- Digital
- Satellites
- Abroad
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
Where in most bands are CW and data found?
- At the lower end
- At the top end
- In the middle
- Anywhere
Answer: A. Narrow band modes are at the lower end of most bands.
The full lesson adds more
In the Foundation course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.
Previous: Making a contact: listening, calling, phonetics, reports and logs