Revision notesFoundation · Section 8: Safety

A safe station: tools, soldering, antennas, height, RF exposure and working outdoors

Using tools and soldering safely, putting up antennas and using ladders, RF exposure, lightning and power lines, and safety when operating outdoors.

Key points

Tools and solderingEye protection for tools (swarf) and soldering (splashes). Use a stand. Ventilate: fumes affect breathing, especially asthma.
HeightHave help and at least one adult present. Ladder 4:1, secured, no overreaching. Tool belt; hard hats.
RF exposureMain effect: tissue heating; eyes most at risk. Guidance: UKHSA and ICNIRP. Don't look into waveguides or stand in front of high-gain antennas.
AntennasDon't touch elements while transmitting; mount them out of reach (not handhelds). Keep well away from overhead power lines.
LightningHigh antennas may need protection; the local authority building department can advise.
OutdoorsTemporary mains, cables and damp ground: risk assessment, protected cables, correct fusing, RCBOs, no work on live equipment.

Covered in the full lesson

  • Tools and swarf
  • Soldering
  • Ladders
  • Falling objects
  • RF
  • Power lines
  • Outdoors

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

What is the correct angle for a ladder?
  1. 4 up for every 1 out
  2. 2 up for every 1 out
  3. As steep as possible
  4. 1 up for every 1 out
Answer: A. A 4:1 height-to-base ratio.

The full lesson adds more

In the Foundation course this lesson has a short video, drills, flashcards and a printable revision sheet, and the course ends with 5 full mock exams.

See the course

Previous: Electrical safety: mains, fuses, RCBOs and batteries

All revision notes · Free video lessons · The three exams